Wireless Gateways

To verify power on a VergeSense gateway:

1. Confirm gateway PoE injector is plugged into an outlet. The PoE injector should have a visible BLUE light.

2. Verify Power icon has a visible green light

Wireless Repeater/Booster

To verify power on a VergeSense wireless repeater:

1. Confirm repeater is plugged into an outlet.

2. Verify repeater has solid blue lights on the front LEDs

Wired Sensors

To verify power on a wired PoE sensor:

1. Visually verify if the sensor has a solid red light on the side

2. Visually verify port powering sensor has visible LED lights.

If a sensor has a rapid blinking red light, please replace the sensor with a new one.

Wireless Sensors

To verify power on a wireless battery sensor:

1. Turn the sensor OFF

2. Wait 30 seconds

3. Turn the sensor ON

4. Visually identify a fast-blinking red light

If the red light DOES NOT blink, check the battery status. Also, make sure batteries and mount plate are securely fastened.

Updated May 15, 2023 16:50