Sensor Mounting Plate
Wired E104 sensors come equipped with a versatile mounting plate, which is designed to accommodate various mounting configurations. E104 sensors use a snapping mechanism to snap to the mounting plate after the plate is secured to the ceiling.
The mounting plate contains holes that allow an ethernet cable to plug into the rear connector of the sensor. See specifications including dimensions in the diagram below:
This table lists common ceiling scenarios and solutions.
Each one is shown in more detail following the table.
Mounting Direct to Ceiling Tile (Recommended)
Mounting to Flat T-bar Ceilings
The following ceiling requires custom mounts not provided by VergeSense. VergeSense will consult with you on suggested mounting methods and hardware.
Mounting to High or Open Ceilings