Wired Sensor (E105) Mounting Solutions

Sensor Mounting Plate

Wired sensors (E105) come equipped with a versatile mounting plate, which is designed to accommodate various mounting configurations. Wired sensors (E105) use a twisting mechanism to attach to the mounting plate after the plate is secured to the ceiling.

The mounting plate contains holes that allow an ethernet cable to plug into the rear connector of the sensor. See specifications including dimensions in the diagram below:

Mounting Solutions

This table lists common ceiling scenarios and solutions. Each one is shown in more detail following the table:

Mounting Direct to Ceiling Tile (Recommended)

The following ceilings require custom mounts not provided by VergeSense. VergeSense will consult with you on suggested mounting methods and hardware.

Mounting to High or Open Ceilings

Updated May 18, 2023 20:39