Installing a Replacement L302 Wireless Sensor

1. Note the orientation and location of the sensor currently installed: It's crucial that the replacement sensor is installed in the exact same orientation and location to maintain the same view.
2. Remove the sensor that will be replaced: Carefully detach the sensor from its mount.
3. Activate the replacement sensor: Remove the purple battery tab to power it on. Note the six-character sensor ID on the sticker found on the side; This will be used in a later step.
   
   
   
    
   When first booting up, the sensor will cycle - Red, Green, Blue (0.5s each color) 3 times.
   
   
   
4. Install the replacement sensor: Using the orientation and location noted in step one, mount the replacement sensor.
5. Enter the sensor ID within the Installer Tool: Navigate to the sensor icon for the previously installed sensor, and replace the existing ID with the six-character ID of the newly installed sensor.
   • If you do not have access to the Installer Tool, provide the sensor ID to your Customer Success Manager, or contact VergeSense support (support@vergesense.com).

Updated August 28, 2024 00:51